Message Us

Le mini-broyeur de fils de cuivre traite et recycle divers types de fils et de câbles de cuivre.

Mini granulateur de fil de cuivre

Name: FTG-03 Mini granulateur de fil de cuivre
Brand: FANTE

Model: FTG-03 · Brand: FANTE

Current configuration: 5.33 kW total power, listed output 20–40 kg/h, applicable range 1–25 mm.

Send your scrap-wire details to check feed suitability and compare equipment on the same measurement basis.

FTG-03 Mini granulateur de fil de cuivre

The FTG-03 is a compact machine for granulating scrap copper wire and separating copper from cable insulation. The current configuration lists 5.33 kW total power and an output range of 20–40 kg/h. Actual results depend on the wire, feeding conditions and separation settings.

Current FTG-03 Specifications

Modèle	FTG-03
Total power	5.33 kW
Listed output	20–40 kg/h
Applicable range	1–25 mm
Net weight	310 kg
Overall dimensions (L × W × H)	1150 × 700 × 1600 mm

Confirm the applicable cable dimensions and feed preparation for your material before ordering. A listed output range is not a guarantee for every cable mix; material and test conditions should be agreed for a capacity comparison.

How the Separation Process Works

Cutting and granulation break the cable into a mixture of copper and insulation particles. Airflow and vibration then separate the particles by their different physical properties. Dust collection is part of the process, and its setup should be assessed alongside feeding and separation.

Recovery and product purity are different measurements. When evaluating a machine, agree how each will be measured using representative feedstock rather than relying on an unexplained percentage.

What to Send for Machine Selection

Photos or a representative sample of the scrap wire.
Conductor material, cable outside dimensions, insulation type and any mixed contaminants.
Required processing rate and whether it refers to incoming cable or recovered copper.
Required copper quality and acceptable residual copper in the separated insulation.
Available power supply, installation space and dust-handling requirements.

Frequently Asked Questions

What is the current FTG-03 output specification?

The current specification lists 20–40 kg/h. Confirm the feedstock and measurement basis when comparing it with another machine or quotation.

What wire range is listed for this configuration?

The current parameter sheet lists an applicable range of 1–25 mm. Confirm your conductor, insulation and cable dimensions so that the range is applied to the correct material.

Should I choose a mini machine or a larger recycling system?

Start with your actual feedstock and processing requirement. Compare a compact machine with a larger configured system when your input volume, material preparation or separation needs differ.