2TPH Reifenrecyclinganlage in der Türkei für die Produktion von TDF installiert
Table of Contents
This project brief concerns a waste-tire recycling installation in Turkey. The stated project requirements were a processing capacity of 2 TPH and approximately 50 mm rubber blocks for Tire-Derived Fuel (TDF).
Project Requirements at a Glance
| Standort | Turkey |
|---|---|
| Feed material | Waste tires |
| Capacity requirement | 2 TPH |
| Target output | Approximately 50 mm rubber blocks |
| Intended use | Tire-Derived Fuel (TDF) |
These figures describe the requirements of this project. They should not be used as a guaranteed specification for a different tire mix, shredder configuration or installation.
Why the Output Requirement Matters
The project focused on primary shredding and controlled output sizing for TDF rather than fine rubber powder production. The process therefore needs to be assessed against the required fuel specification and the actual incoming tires.
Die Reifenschredder is the primary size-reduction equipment described in the project. Feed preparation, conveying and any screening or recirculation should be confirmed for a new installation.
Planning a Similar TDF Project
- Identify the tire types, outside dimensions, weight range and feed preparation.
- Confirm the receiving facility’s TDF size and material-quality requirements.
- Agree whether capacity means incoming feed or accepted finished output, and how it will be measured.
- Check the proposed layout, power supply, maintenance access and installation scope.
- Agree the commissioning checks and acceptance criteria before ordering.
How to Assess a Proposed Configuration
A useful capacity comparison records the feedstock, target output, operating period, feeding method and treatment of oversize material. A project with different tires or a different final use should be evaluated separately.
For projects producing rubber granules or powder, review the complete tire recycling process and the additional separation and size-reduction stages required for that output.
Discuss Your Tire Recycling Project
Send your tire details and target output to discuss an appropriate configuration. If capacity or output requirements are not yet fixed, describe your material supply and intended application.
