No matter what business you are in, there are off-peak and peak seasons. The same goes for investing in a fully automatic Kupfer-Reis-Maschine for recycling and processing of waste wires and cables. Many investors will choose to temporarily suspend production during the off-season. Proper storage is essential for a long-idle automatic copper wire granulator. Key maintenance points include the following aspects:
Cleaning equipment: Before decommissioning, thoroughly clean all parts of the copper wire pellet machine, especially the cutting and grinding parts, to remove residual copper wire and particles. Make sure no residue remains inside the device to prevent corrosion and clogging.
Anti-rust treatment: Carry out anti-rust treatment for parts that may rust, especially metal surfaces. Coat these parts with anti-rust oil or agent to guard against long-term idle rust.
Lubrication and maintenance: Fully lubricate all moving parts of the machine, including bearings, gears, and other transmission parts. Apply proper lubricants to avoid component damage from long-term non-operation.
For power safety: Switch off and disconnect all power sources to fully shut down the machine. This avoids unexpected startup and electrical faults.
Covering protection: Use a dust cover or plastic sheet to cover the entire machine to prevent dust, moisture, and other impurities from entering the inside of the equipment.
Environmental Control: Store the machine in a dry, ventilated area away from moisture and extreme temperature conditions. If possible, keep the temperature and humidity of the storage environment stable to prevent damage to machine components due to environmental changes.
Regular inspections: Even if the equipment is not used for a long time, its status should be checked regularly. Perform a thorough inspection every few months to make sure there is no rust, corrosion, or other issues. You can run the machine properly for a few minutes to ensure that the lubricant is evenly distributed.
Record and Label: Keep detailed records of the current status of the machine before taking it out of service, including any parts and maintenance items that require special attention. Mark important information on the machine for future reference when reactivating.
By following these precautions, you can ensure that your copper wire pellet machine remains in good working order after long periods of outage, extending its service life and ensuring its stable performance.
